Showing posts with label Buckby flight. Show all posts
Showing posts with label Buckby flight. Show all posts

Thursday, 6 April 2017

Braunston to Whilton

Sunday 26th March

Not such an early start this morning, we were off at 9am and passed The Milly M moored further up the canal, we started to make our way up the Braunston locks when Maffi and Molly arrived to help us. 

At Brauston top lock - thank you for your help Maffi
We said our goodbyes at the top and no doubt he will pass us in a month or so as he heads south. Next came Braunston tunnel and we were soon at Norton junction where we carried on and down the Buckby flight. I still can't believe there's only seven locks in this flight, they are so tough going and again we were following a boat down so they were all against us.


We made it to the bottom and moored up opposite Whilton Marina where it all started for us five years ago.

A fat boat stopped in front for a quick break

6 miles and 13 locks

TOTAL 51.5 miles and 78 locks

Thursday, 30 July 2015

The Dreaded Buckby Flight


We were only a couple of boat lengths away from the top lock so not far to go before we were straight into it. At the little lock keepers hut there was a volunteer, who quickly disappeared inside when he saw us coming, he then went round the back of the hut for a smoke and when I wasn't looking he made a dash back to the hut and shut the door. Not sure why he was there really, he certainly wasn't helping boats through, James had walked up earlier with Dudley and the volunteer was just sitting watching the boats going through. He wasn't keeping the lock area clean and tidy either, the dog poo bin was well and truly overflowing and he was sitting about two foot away from it, with litter all around too. The bottom gate beam is huge and it took a fair bit of encouragement to close.



Most of the locks still have the side pounds, although they're not in use now

James and Dudley
We met boats coming up in almost every lock so it quite easy going. The paddles were all fairly easy to open as well not how I remember. We got to the dreaded lock 12, this has been the only lock on all of the ones we have done where James has had to moor up and come and help me close it, the guy on the boat leaving warned me that it was a pig to close. As James passed through he shouted up that he would moor and come and help, I was determined not to be beaten and I was so pleased to actually be able to close it myself - how very sad am I, or is that just stubborn!! So in all I actually enjoyed the flight this time, maybe the sun shining helped a bit.

Another side pound, excellent for wildlife, this one had Moorhen chicks in it
Down through bottom lock 13 and we've moored up in the stretch just opposite Whilton Marina. We can hear the distant hum of the traffic on the M1 and the trains aren't too often, but we've arranged to meet the guy from Elite Furnishings here tomorrow.

Opposite Whilton at the bottom of the locks
1.5 miles and 7 locks

TOTAL 373.5 miles and 379 locks








Tuesday, 16 April 2013


A Quick RCR Review - Call Out Number One...


I guess the most important two questions are could the engineer find a fault, and could they fix it. 

After that I think it comes down to punctuality, engineers customer service, the initial phone call and its customer service and does the service get close to offering value for money. 

So that makes six quick questions to answer based on call out number one

1. Yes - I suspected either a leaking pipe (many of the cooling pipes had spent a good year or so under water so seem likely to perish sooner or later) or a disturbed joint. I guess it could have been a head gasket or internal water ways problem but that did seem less likely. The actual fault was no more than a leaking joint at the thermostat housing and one below the header tank/heat stack. RCR only covers the boat for the engine coolant system and not domestic. Ours are interlinked and you can't isolate one from t'other. It's a system design fault that I probably will get sorted after all it should be no more than a couple of isolation taps. 

2. Yes - not add easy to fix as you may think, parts of our engine are very nearly impossible to get to. In fact the rear bulk head has had an access hatch cut through (now welded up) at some point to get to the front end of the engine. Tom or engineer is a cross between a meerkat and a contortionist. This was why I called out RCR. As wedged as I could get down the side of the engine I was still a good half a foot from the last of the pipes down in the corner of the engine room. Whilst twisted into angles that he won't be able to get into for the majority of his career Tom also 'advised' me as to what joints along the domestic system may also need a look at in the future. After making him a nice pot of Yorkshire tea I had a quick look but they all looked fine :-) its not that RCR don't do any work on the domestic side it's just that they charge £40 for the call out if that's where the fault lies.

Tom, as soon as he pops up he's gone back down again :-) 


So for me that's the two most important bits sorted, I'm not to worried whether the engineer is polite or sits down me engine 'ole with his flask, cheese and pickle sarnies and a packet of woodbines! As long as the job gets done. 

3. Punctually - surely a fluke, Tom arrived at the exact time his office had said he would - to the minute and we were about half a mile from the nearest road so he had a bit of a walk. 

4. Tom was very polite and although only a young guy he was happy to come inside LJ for a chat and a brew whilst the engine was warming up and the system pressurising. He even complimented the open airy feel of LJ, so straight into Deb's good books then. 

5. Our membership paperwork is at Pips and all I had was an old email with our membership number. I googled RCR to look for a breakdown call out number but could only find the main line. I dialed expecting to be hanging on the phone for a time whilst someone gave me a number (that I expected to be an 0800 - so chargeable on most mobile lines) or to have to go through long lists of menu options. After dialing the main number option one is for breakdowns so that was a good start. Charlotte answered within three rings and found our details on their system. After going through a couple of questions she said she would find out which engineer was local to us and call me back. By the time I had sat down with my book she had called back to explain that there was an engineer local to us who was already on another job. She would call back as soon as he had finished with an ETA. Charlotte called back and Tom was with us within 45 minutes. At this point, in line with the info on their web site she asked if I wanted anyone contacted in relation to the breakdown and if we wanted Tom to stop off and pick up any supplies (maybe the AA and RAC should ask if you want a sarnie and coffee brought out as well)

6. Value for money - yes. We are bronze members as the higher levels give you recovery to your permanent mooring , subject to conditions, which we don't need as CC'ers. £124 pounds a year for four unrelated breakdowns seems fair enough. However after your first 30 days membership there is a list of parts that are covered as well. Not just cheap stuff but things like gearboxes and water pumps that can cost into the thousands of pounds. so its probably worth £10 per month to insure those items for breakdown. 

So out first experience of RCR has been a good one and we were able to be up at six this morning and be on out way. 

Sunday, 14 April 2013

Fridge pickup...


Fridge pickup...


After a pleasant few days we made off for the chandler's to pick up the fridge. We had agreed with them that we would leave it a few days because we thought they would be too busy on sale day. It's strange really, they didn't do too much to advertise the sale day and as a result the shop was pretty quiet, and we thought we would be queueing up at the door. 

Midland's wharf is directly opposite Braunston junction and a boats length from a water and rubbish point so it can get quite busy. We had to turn away from the wharf, towards the centre and reverse in so we would be heading in the right direction when we left. Whilst we were mooring up there was a boat filing with water, two waiting and a wide beam coming through the junction. We decided we weren't desperate for water and would fill up at the top of the Buckby flight. 

At the chandlers wharf

Precious commodity this water


Loo emptied, rubbish dropped off, fridge and a few other bits picked up we left Braunston and headed up the locks. A warmer dry day but still a chilly easterly wind. The lock gates were heavy but the paddles not to difficult to turn. It was slow going though as the pair of boats in front of us were on a bit of a go slow. 1.40 for six locks. 

Bottom lock from bottom...

... and top


We watered up at the top of the Buckby  flight before going down just one lock by the still closed New Inn and back to where we moored 363 days ago, spooky eh?  Next job would be putting the fridge in. 

There is a fair bit of road noise from the motorway and of course we are back in virgin train territory but it is a pleasant mooring spot. Nice wide grassed towpath with fields behind and more farmland opposite. Little cottages look over the canal, all with pedestrian access only, with a somewhat grander property with windy willows. 

The wind certainly is in the willows today!

Mother nature gets out her crayons


The new fridge installation isn't just a case swapping over new for old, the 12v wiring is far too substandard for the fridge that needs chunky wire to stop voltage drop between it and the battery bank. The rule of thumb is about 1mm sq per metre distance between the two. So we had to also buy 28m of rather expensive cable as well. The batteries and fridge just happen to be on the same side of the boat as virtually all our storage cupboards. So to route the cable we had to take out everything from the kitchen cupboards, remove the bathroom storage shelving, both wardrobes and storage underneath and all the office cupboards! Most of which has now gone back away but unfortunately my puny cordless drill isn't up to the job of drilling through the bulkhead into the engine room to make the final connections, a job for the boat yard me thinks. 

The downsides to living in a small space

Yes we even had to take the oven out to get new wires in


Next blog may well be a review of River Canal Rescues service as the engine has decided that it has had enough of holding onto its antifreeze :(